Gemstone dice on a lapidary workbench

Gemstone dice are made by sawing a slab of real stone into a blank, grinding it into a polyhedron on a faceting machine, polishing every face, and then marking the numbers. It is slow, dusty, a little nerve-wracking work, and it is the reason a stone d20 feels nothing like a plastic one. Below is the whole process, step by step, plus what goes wrong along the way (spoiler: rocks do not care about your feelings).

If you just want to see the finished result, our gemstone dice sets are the shortcut. If you want to know what happened to the rock before it landed in your dice tray, keep reading.

D20collective
d20collective.com
Bring Natural Stone to Your Table
Explore gemstone dice sets with distinctive stone patterns, each shaped by the natural variations that make gemstone dice unique.
Visit

TL;DR

  • Gemstone dice start as solid chunks of real stone, not resin with sparkly dust mixed in, so no two stones look the same.
  • The usual path: choose and inspect the rough, saw it, cut the faces at exact angles, polish through finer and finer grits, then mark the numbers.
  • A d20 needs precise angles and a steady hand. Polishing alone can eat hours per die.
  • Stone can crack, chip or hide flaws, so makers lose material along the way.
  • Treat stone dice kindly (soft landing, soft storage) and they will outlast most of your campaigns.

Table of Contents

What gemstone dice actually are

A true gemstone die is carved from a single piece of natural stone: quartz, agate, amethyst, jade and so on. That sets it apart from resin dice that have gemstone chips or powder stirred in. In those, the resin is the body and the stone is a garnish. In a stone die, the stone is the whole meal.

That difference shapes everything else. Resin is poured into a mold. Stone has to be removed, bit by bit, until a die is left. If you want the broader tour of dice materials (metal, resin, wood and more), our guide to dice material types covers them with a straight face, mostly.

Step 1: Choosing the rough stone

Every die begins as rough, meaning uncut stone straight from the ground, and the choice matters. Hobbyist makers who document their work suggest picking affordable stones and checking their properties on mineral databases first; in their experience, quartz, agate and amethyst are tough, while softer, friendlier stones like serpentine and howlite are easier to work (Akik Dice Project).

Hardness is the headline spec. The Mohs scale ranks minerals from talc at 1 to diamond at 10, and quartz and its varieties, including agate and amethyst, sit at 7 (Rockhounding.org). That is hard enough to resist everyday scratches from a dice tray, which is exactly what you want from something you will throw across a table.

Hardness is only half of it. A stone can be hard and still split along natural weak planes. Makers look for rough with a good hardness and no obvious cleavage planes, so the die will keep its shape through years of rolling.

Inspecting and cleaning

Before any cutting, rough gets scrubbed with a soft brush and warm soapy water, then checked for cracks, fractures and other structural weak points. Lapidaries also orient the stone to show off its color and natural inclusions (Natural Gems Belgium). A hidden crack discovered after six hours of work is the lapidary version of stepping on a LEGO.

Step 2: Sawing the blank

Next, the rough is sawed down to a rough block close to the size of the finished die. In one documented example from a gem-cutting studio, a piece of black jade was sawed into a cube of the right size before anything else happened (Denver Gem Cutting).

This stage is about setting up the shape and removing the obvious waste. It is also where makers see the stone’s insides for the first time. Sometimes the inside is gorgeous. Sometimes it is a disappointing beige. Rocks are like that.

Step 3: Cutting and faceting the faces

This is the heart of the process, and the reason a d20 is a real flex.

A d20 is an icosahedron: twenty triangular faces, all identical, meeting at precise angles. To cut one by hand on a faceting machine, the maker needs to know the angle and the index position (how far to rotate the stone) for each face. In the black jade example, a sample die was waxed onto a dop stick and set in the machine to record the angles and indexes of its faces. The same numbers were then used to cut the new piece, and removing the bulk of the material on a sharp diamond wheel took a while (Denver Gem Cutting).

The d20 is a good example of how the numbers get specific. One documented quartz d20 build used a faceting design with an 80-index gear for five-fold symmetry and an angle of 37.4 degrees (Gan Jing World). You do not need to memorize that. You only need to know that if the angle is off by a hair, the die will not sit flat, and a die that does not sit flat is a die you will not trust.

Step 3: Cutting and faceting the faces

Why symmetry matters

Every face has to be the same size and shape, and every edge has to meet cleanly. A uniform die has no “lucky” side. Makers get there by repeating the same angle and index on each facet, one face at a time, checking as they go.

Step 4: Smoothing and polishing

Cutting leaves facets rough and frosted. Polishing is where the stone starts to glow.

The usual approach is a sequence of finer and finer abrasive wheels (laps). In the quartz d20 example, a 60 grit diamond lap removed bulk material, a 600 grit lap cleaned up the marks from the 60 grit, and a 3000 grit lap prepared the stone for polish. Then cerium oxide mixed with water did the final polish at a slower speed than cutting (Gan Jing World). In that same project the maker spent 25 minutes polishing the first facet alone, and fully polishing one side took four to five hours.

Progression of gemstone dice polishing stages

Read that again. Hours, per side, for one die. This is why handmade stone dice are never as quick to produce as a batch of injection-molded plastic ones, and why people who make them develop a faraway stare.

Hobbyists working at home often finish faces, edges and corners with progressively finer sandpaper, starting around 1000 grit and going up for a consistent result (Akik Dice Project).

Step 5: Adding the numbers

A blank polyhedron is just a very pretty paperweight. Numbers come next, and there are a few ways to do it.

One hobbyist method is to engrave the pips or numbers with a Dremel and dental burrs, then fill the recesses with paint (Akik Dice Project). After painting, the faces get sanded again so the paint sits flush in the engraving and not on top of it.

The two things to get right are depth and placement. Numerals should be deep enough to hold paint and read clearly, and centered on each face. Hard stone does not forgive sloppy engraving, because you cannot undo a slip. There is no Ctrl+Z for agate.

Step 6: Checking the finished die

A good maker does a last round of quality checks before a die goes anywhere near a game:

  1. Look at every face. All faces should be the same size, with sharp, even edges and no chips.
  2. Check that it sits flat. Set it on a hard, flat surface and look for rocking.
  3. Check the numbers. Each should be legible, centered and consistent with the others.
  4. Do some practice rolls. A die that keeps landing on the same few numbers needs another look.

A stone die that passes is ready for the table. One that doesn’t goes back to the polishing wheel or, sometimes, into the “decorative paperweight” pile.

Where it goes wrong: cracks, chips and waste

Stone is a natural material, so it comes with natural surprises.

  • Hidden fractures. A crack not seen at the start can show up during sawing or cutting and ruin the blank.
  • Chipped edges. Sharp corners are the most vulnerable part of any polyhedron, and a slip on the wheel can take one off.
  • Material loss. Sawing and grinding turn a lot of rough into dust. A good chunk of what a maker starts with does not end up in the die.
  • Color and pattern surprises. Inclusions and banding are what make stone dice charming, but they are also unpredictable, so the maker cannot always know what a die will look like until it is cut.

That is why careful makers inspect and orient rough before they cut, and why gemstone dice have a character that no mold can copy.

How the process changes by stone

Each stone behaves differently on the wheel. Tough quartz-family stones such as agate and amethyst hold an edge and a polish. Softer stones like howlite or serpentine are easier to cut and shape, though they scratch more easily than quartz. The hardness of the stone sets the pace of the work, the sharpness of the edges and how the finished die should be treated later.

Why every gemstone die is one of a kind

Because each die is cut from a natural stone with its own banding, veins and inclusions, no two are identical. Two sets of the same stone can look related but not twinned. That is the charm: you are rolling a piece of geology that took a very long time to form and a few hours to shape.

Our take

We love gemstone dice because they sit at the opposite end of the spectrum from boring, mass-produced accessories. Our whole approach is built around unique, visually striking dice, and gemstone sets are a big part of that.

When you understand how much patience goes into turning a rock into a polyhedron, you start to appreciate why a stone set feels special in the hand. You get heft, color and a pattern nobody else at your table has.

We are also big on the community side of the hobby. Dice are about the adventure you have with your friends, not just the thing you buy. A set that gets a gasp when it hits the table is a set doing its job.

Our gemstone series gives you that look without you needing to buy a faceting machine, learn lapidary, or explain to your family why the garage is full of rock dust.

Teresa

Looking after stone dice

Once you have a set, a little care goes a long way. Stone is hard but not indestructible, and edges are the weak spot.

  • Roll on a tray. Dropping stone dice on hard, rough surfaces is the quickest way to chip a corner.
  • Keep them soft. Store them in velvet-lined boxes or fabric bags, not loose in a pocket with keys.
  • Clean gently. Use a dry, soft cloth, and skip long soaks and ultrasonic cleaners.

For a longer rundown, see our guide on preventing dice from chipping.

Ready to roll a few?

If all that talk of grit and angles has you itching to own a stone set, start with our Gemstone Dice Sets collection. The Heartstone 7-piece set and the Earth Stone set are good places to begin, and the Stone of Golorr is there for anyone who wants a name that sounds like a boss encounter. Every order is covered by our unconditional money-back policy.

Stone of Golorr - 7 Piece DnD Dice Set | Gemstone RPG Gaming Dice

FAQ

Are gemstone dice made from real stone?

Yes, true gemstone dice are cut from solid natural stone such as quartz, agate or amethyst. That is different from resin dice with stone chips or powder mixed in, where resin forms the body of the die.

How long does it take to make a gemstone die?

It depends on the stone and the maker, but polishing is the slow part. In one documented quartz d20 project, polishing a single side took four to five hours (Gan Jing World).

Why is a d20 harder to make than a d6?

A d6 is basically a cube. A d20 has twenty identical triangular faces that must meet at exact angles, so the maker has to set the faceting machine precisely for each face. Small errors show up as a die that rocks or rolls unevenly.

What stones are best for dice?

Tough stones in the quartz family, like agate and amethyst, are popular because they rate 7 on the Mohs scale (Rockhounding.org). Softer stones like howlite are easier to shape.

Are gemstone dice fragile?

They are hard, but sharp edges can chip if dice are dropped on hard surfaces. Roll on a tray and store them in soft-lined boxes or bags to keep them in good shape.

En, How gemstone dice are made

Leave a comment

All comments are moderated before being published

Featured products

Dice Giveth and Taketh Deluxe Dice BagDice Giveth and Taketh Deluxe Dice Bag
Sale price$28.00 Regular price$37.00
Dice Giveth and Taketh Deluxe Dice Bag
In stock, 198 units
Backpack of HoldingBackpack of Holding
Sale price$102.00 Regular price$109.00
Backpack of Holding
Sold out